Instruction Manual
(This Manual)
Specifications
Folding Bench Ivory
LV-071-1-IV
Instruction Manual : Ver 1.00
Contents (Name of the Parts)
●Material: Frame / Aluminum Alloy, Polyethylene,
Synthetic Rubber,
Seat / Polyester
●Size: 1,095(43.1”)×330(13”)×360(14.2”)(h)mm
●Stowed: 1,095(43.1”)×65 (2.6”)×470 (18.5”)mm
●Weight: 2.4kg(5.3 lbs)
Thank you for purchasing a Snow Peak product. This product is folding bench, designed for two people, for camping. For safety, read the following instruction manual
before use. Please keep it safe for future reference. Finally, if you find anything that you do not understand in the description or any problems with the product, please
stop use immediately and contact the retailer or Snow Peak Customer Service.
MADE IN CHINA
Snow Peak, Inc.
456, Nakanohara, Sanjo-Shi, Niigata 955-0147 Japan
Tel. +81 256-46-5858 / Fax. +81 256-46-5860
www.snowpeak.co.jp
Snow Peak USA, Inc.
404 NW 23rd Avenue, Portland, Oregon 97210, USA
Tel. +1 (503) 461-0781 / Instagram. @snowpeakusa
Email. [email protected] / www.snowpeak.com
Safety Precautions: Before use, please read thoroughly to ensure safety and avoid accidents.
WARNING / Misuse could result in serious injury or death.
●Before using the product, check each part for abnormalities. If there are abnormalities, take the product to the dealer or Snow Peak Customer Service
for inspection or repair.
●When using this product near fire or products that produce high temperatures such as gas products, observe the following points. Failure to do so may cause
deformation of the chair or fire.
(1) Avoid placing the product too close to fire.
(2) Keep an eye on the product to avoid contacting sparks or heat sources.
(3) When leaving the chair, keep the chair as far away from the heat source as possible.
●Never attempt to modify the product. Doing so may impair functionality, reduce strength and durability, etc.
Seat Cloth
Flame
Maintenance
●Before using a product that has been in storage for a long time, check each part for abnormalities. If there are abnormalities, take the product to the retailer
or contact Snow Peak Customer Service for inspection or repair.
●To remove stains on the seat cloth, wipe out with cloth soaked in detergent (do not wash).
●Dry in a shaded, well-ventilated area.
●Please store this product in a well-ventilated area away from high temperatures and humidity.
CAUTION / Misuse could result in injury to the user and/or damage to property.
●Place the chair on stable ground and not on a slope or uneven surfaces.
●Put cloth or felt on the bottom of the chair frame when using it on the floor or lay down a Tatami to prevent damage to surfaces.
●Be careful not to pinch your fingers on the frames during set up, and always open and close the legs slowly.
●Do not sit on the chair in an irregular manner, such as sitting on the edge of the seat. Do not use this product for any purpose other than sitting.
●Do not sit down roughly and do not shake the chair. Doing so may warp or damage the chair.
●Children should only use this product with adult supervision. Failure to do so may result in an unexpected accident or injury.
●The chair material is not fire-resistant. Use caution when sitting near an open flame.
●The product is not for permanent use.
●Stow the bench in a location that is dry and moderate in temperature.
●The aluminum pipe is colored anodized (oxide film) processed. Scratching may expose the base metal.
Warranty
Repair
●For repairs, please contact the retailer where you purchased the product or Snow Peak user service.
●When you ask for repair, please make sure that the product is dry and clean.
●Please attach a memo or some kind of tag indicating the needed repair, and please write details of when and how the damage occurred.
●Shipping cost and repair fee for the repair as follows.
1. Within warranty: Return shipping cost and repair fee will be covered by Snow Peak.
2. Outside warranty: Return shipping cost and repair fee will be covered by the user.
The specifications of Snow Peak products are based on field testing and quality control to ensure the correct function and longevity of every product. If apparent defects
in the manufacturing of the product are found, the defective product will be repaired or exchanged free of charge. Damages, as follows, are not covered under warranty.
1. Material deterioration caused by age. / 2. Damage caused by modifications or rough handling. / 3. Damage caused by improper use not following the instruction manual.
/ 4. Damage caused by unexpected accidents. / 5. Damage not caused by defects in the manufacturing process. / 6. Damage caused by dust or rust. / 7. Damage or
defects caused when dismantling the product. / 8. Damage and defects caused by dropping or other shocks to the product. / 9. Deterioration or failure of parts due to
friction. / 10. Damage caused by the use of the product in combination with other maker’s products.
