Snow Peak FES-091, Руководство пользователя

Страница: 20 / 28

19
⑥
Please hook the plastic hooks from top to bottom to the A pole / C pole / center pole. Fix the crossing part of
poles with tape with Velcro through the o-ring.
* For the tension rope of the crossing
part of poles /Center pole part, turn
the O-ring tape sewn on the body
around the crossing part of poles
/center pole part for one turn and
apply tension to the tension rope.
Note: To maintain the pole’s stability
amidst windier weather conditions,
peg down the main body and the
extension ropes firmly.
⑦ Place the Duralumin peg through the loop attached to the ring pin on the hem and peg down all the loops inside
the room. Peg down the rope firmly. Use the provided upright pole and a forked-end rope to lift the entrance/exit
door panel. Adjust the direction of the rope so that no wrinkles remain.
Note: When it rains, the door panel tends to fill with water, so either tilt the pole and make a gradient or use a short
pole and pull down the center of the front with a large V-shaped rope so that water can escape.
* Crossing part pole
Plastic hook
Pole
C pole
A pole
O-ring
Forked-end rope 7m(22’9”)
Upright pole
3.5m(11’5”) rope
3.5m(11’5”) rope
2.5m(8’3”) rope
1.5m(4’9’)
rope
2.5m(8’3”) rope
C pole
A pole
O-ring
Rope
Make a water escape route
in the shape of a V.