❑
Cleanliness
Check that all insulating surfaces and covers are
clean and free from dirt and all other contaminants.
Clean with soap and water and dry with a soft, lint
free cloth.
For contaminants that can not be removed with
soap and water use methylated spirits or
denatured alcohol followed by soap and water.
■
Placards and Decals
Look to see that all plac ards and de cals are in place
and leg i ble. Clean dirty or ob scured de cals with
soap and wa ter and a soft lint cloth. Re place any
miss ing or il leg i ble plac ards or de cals be fore plac -
ing the EPV16 into ser vice for the daily work shift.
NOTE:
Owing to manufacturing variances and customer
preferences there may be some small differences
in the decal layout on specific machines.
NOTE Safety Decals:
Details of the safety decals and their locations
are listed in the Safety chapter(s) near the
beginning of this manual.
■
Placards and Decals
Machines with Electric Controls
Re place ment de cals and plac ards for the EPV16
are avail able from Snor kel deal ers.
❑
Standard placards and decals
See pages 9 - 10 and 9 - 11 for the de cal list and lo -
ca tions of in di vid ual de cals.
■
Placards and Decals
Machines with Hydraulic Controls
Re place ment de cals and plac ards for the EPV16
are avail able from Snor kel deal ers.
❑
Standard placards and decals
See pages 9 - 12 and 9 - 13 for the de cal list and lo -
ca tions of in di vid ual de cals.
■
Placards and Decals
Low Voltage Insulated Machines
Re place ment de cals and plac ards for the EPV16
are avail able from Snor kel deal ers.
❑
Standard placards and decals
See pages 9 - 14 and 9 - 15 for the de cal list and lo -
ca tions of in di vid ual de cals.
Note:
From time-to-time certain decals may be deleted,
altered or replaced, or new decals may be
added in line with new safety regulations or
machine specification changes.
If you are unsure or want to check a particular
decal or its placement on the machine contact
your nearest Snorkel dealer or the snorkel
website.
EPV16 – 13642-1
Rev A
page 9 - 9
9. Pre-operational Inspection
