Snorkel 000003 Series, Руководство по запасным частям

Страница: 275 / 310

Maintenance – 8 660SJ
Frequent Inspection and Maintenance – Every 90 Days or 150 Hours
Item Procedure Information OK
Engine
Charging system Check for proper operation
Air filter Check for wear and damage
Hour meter
Check for proper operation
Belts and hoses Check for wear and damage
Hydraulic pump Check for proper operation
Battery terminals Clean terminals and check cable
condition
Battery voltage Check for proper voltage
Indicator gauges Check for wear/damage and proper
operation
Engine oil Check for wear and damage/level Between add and full
Engine coolant Check level Between add and full
Engine Start – Stop Check for proper operation
Electric throttle
Check for proper operation
Electric choke, if equipped Check for proper operation
Engine governor setting Check for proper operation
Platform Rotator
Structural
Check for damage and cracked welds
Hydraulic rotator actuator Check for leaks, wear, and damage
Platform rotation holding valve Check for proper operation
Mounting bolts and pin caps
Verify that all fasteners are in place
and are tight
Options
110 volt AC generator Check for proper operation
220 volt AC generator Check for proper operation
Dual fuel system
Check condition and for proper operation
LP gas system and control Check condition and for proper operation
Drive motion alarm
Check for proper operation
Flashing light Check for proper operation
Cold weather start kit – diesel only Check for proper operation
Hydraulic system cold weather warm
up kit
Check for proper operation
Driving lights Check for proper operation
Platform work lights Check for proper operation
Platform control cover
Check condition and for proper operation
Sandblast protection kit Check for proper operation
Airline to platform
Check for proper operation
Spark arrestor muffler – Deutz only Check for wear and damage
Platform welder Check condition and for proper operation
Platform glazier package Check condition and for proper operation
Optional platform Verify that all fasteners are in place
and are tight