12
11
Getting Started
Getting Started
Charging Battery
Micro SD Card Installation
1.
The USB-C charging port can be found on the bottom of the ez4G near the headphone jack.
2.
Use the Snapfōn® USB-C charger by aligning and inserting it into the charging port. The charger can be
used with a Snapfōn® USB wall charging plug, computer or vehicle USB port, or compatible USB port.
A.
B.
1.
Position SD Card by following the visual diagram next to the SD Tray with LOGO side up.
2.
Slide SD Card into place following the arrow until fully inserted.
Note
: Micro SD Card can be used to expand storage.
A.
B.
Optional Charging Cradle
1.
The ez4G can also be charged using the ez4G Charging Cradle. The USB-C charger plugs in to the
USB-C port located on the back side of the Charging Cradle then the ez4G simply sits in the Charging
Cradle while charging.
2.
Optional Charging Cradle insert. This insert is to be used when you have no Tuff Case on your ez4G. If
you have a Tuff Case on your ez4G this insert does not need to be used.