background image

ICE MAKER

SK-289S /SK-289H /SK-289U

PRODUCT MODEL NUMBER

115 Volt, 60 Hz., AC

 only, 

15-

 or 

20-amp 

electrical  supply,  properly  grounded  in  accordance  with  the  National 

Electrical Code and local codes and ordinances, is required.

It is recommended that a separate circuit, serving only your ice maker, be provided. Use areceptacle which cannot be 

turned off by a switch or pull by chain.

ELECTRICAL

A cold water supply with water pressure between 

0.13 Mpa 

[

19 psi

] and 

0.55 Mpa 

[

80 psi

] is required to operate ice 

maker. If you have questions about your water pressure, call a licensed, qualified plumber.

WATER

Choose  a  well  ventilated  area  with  temperatures  above 

55°F 

(

13°C

) and below 

110°F

 

(

43°C

). Best results are 

obtained between 

70°F 

and 

90°F 

(

21°C 

and 

32°C

).

Installation of the ice maker requires a cold water supply inlet of 

3⁄8" 

(

6.35 mm

) OD soft copper tubing with a shutoff 

valve or drain pump, only to carry the water to an existing drain.

To ensure proper ventilation for your ice maker, the front side must be completely unobstructed. The ice maker may be 

closed-in on the top and two sides, but the installation should allow the ice maker to be pulled forward for servicing if 

necessary.

LOCATION

ICE MAKER

UNIT DIMENSIONS

E

D

W

27

26

36.5

Full cube size 7/8”x7/8”x7/8” 

Half cube 7/8” x7/8” x5/8”

Refrigerant R290

Dimensions are for planning purposes only. 

Отзывы: