12
snom technology AG
[ F
R E Q U E N T L Y
A
S K E D
Q
U E S T I O N
]
Confi guring snom phones for Mass Deployment V3.4
13
[ F
R E Q U E N T L Y
A
S K E D
Q
U E S T I O N
]
consultation transfer. The phone needs
to have 2 active calls in order to use this
feature.
key_seq_divert
V
alid values: For example <*3>
Default: blank
Description: Key code that is sent by the
phone to the PBX if it is set and redirection
is activ
e with a redirection number.
key_seq_conf_on
Valid v
alues: For example <*3>
Default: blank
Description: Key code that is sent by
the phone to the PBX if it is set and the
“Cnf.On” key
is pressed on the phone.
key_seq_conf_off
Valid value
s: e.g. <*30>
Default: blank
Description: Key code that is sent by
the phone to the PBX if its set and the
“Cnf.Off” key is pre
ssed on the phone.
key_seq_pickup
Valid
values: e.g. <#11>
Default: blank
Description: Key code that is sent by the
phone to the PBX to pick up an alerting
call. This is activated by pressing the
‘pickup’ key when the key_seq_pickup
is set.
key_seq_end
Valid v
alues: e.g. <#>
Default: blank
Description: The end symbol that is
automatically appended to the above key
codes before they are sent to the PBX.
The end symbol marks the end of a key
code sequence.
key_single_call_mode
Valid
values: <true>, <false>
Default: true
Description: Set to <true> the phone
simulates a simple analog phone which is
able to ha
ndle one call in parallel only.
Codec and DTMF settings
codec[1-5]_name[1-7]
Va
lid values: 0 (ulaw), 8 (alaw), 3 (gsm),
2 (G.726-32), 18 (G.729) (also 9 (G.722),
4 (G.723) for snom190 only)
Default: 0, 8, 3, 2, 18
Description: Name of the codecs for
line1-7 to be
used in preferred order
1-5.
codec_size[1-7]
Va
lid values: <80>, <160>, <240>,
<320>
Default: 160
Description: Packet size in bytes. Affects
only ulaw and alaw codecs (other codecs
have fixed packet size). 80 (10 ms), 160
(20 ms), 240 (30 ms) and 320 (40 ms)
bytes are av
ailable per line.
dtmf_type_outofband
Valid values: <true>, <false>
Default: true
Description: Options for Out of band
DTMF. <true> forces the use of Out of
band DTMF, <false> turns it off. Its used
for H.3
23 only !
dtmf_type_inband
Valid values: <true>, <false>
Default: on
Description: Options for In band DTMF.
<true> forces the use of In band DTMF,
<false> turns it off. Its used for H.323
only !
dtmf_payload_type
Vali
d values: Integer values, e.g. <100>,
<150>.
