14
IMPORTANT INFORMATION
Use only the power adapter supplied with this product (Ten Pao,
model number S003AKU0600040). To order a replacement power
adapter, visit our website at
snomamericas.com
.
The power adapter is intended to be correctly oriented in a vertical or
floor mount position.
The prongs are not designed to hold the plug in place if it is plugged
into a ceiling, under-the-table or cabinet outlet.
Switching on the handset
The handset battery is preinstalled. When you unpack the handset
form the delivery box, you must switch on the handset using the
provided key. Follow the steps below. You only have to do this once.
To switch on the handset:
1. Insert the provided key into the hole at the bottom rear of the
handset.
illustration scale 50%
PART DESCRIPTION
COLOUR
TEXTURE/FINISH
Mickey Law | 22. Jan . 2019 | Revision 1.0
03. Lens
Rubber (Injection molding) - Transparent - Milky white
Matte
Ra 3. 15
Matte
04. Keys
Ra 3. 15
06. Antenna
PMMA (Injection molding) - Transparent
Rubber spray - 1st - Pantone Cool grey 3C / 2nd - Snom standard black
Rubber spray - 1st - Pantone Cool grey 3C / 2nd - Snom standard black
Laser etching on 2nd spray ( Legends , )
Silkscreen on the top ( ) - Pantone 361C, ( ) - Pantone 485C
Silkscreen on the top ( , , , , , , , ) - Pantone Cool grey 3C
Rubber (Injection molding) - Snom standard black
High gloss
ABS (Injection molding) - graphite
ABS (Injection molding) - Snom standard black
SPI B-1
SPI A-1
PMMA (Injection molding) - Transparent - Milky white - backlit
High gloss
01. Front cabinet
01a. LCD frame
02. LED
Silkscreen on the top ( ) - Pantone 8001C
Silkscreen on the top ( ) - Pantone 361C, ( , ) - Pantone 485C
Rubber (Injection molding) - Transparent - Milky white
04a. Keys - laser etching
05. Side rim
ABS (Injection molding) - graphite
Ra 3. 15
07. Belt clip
ABS (Injection molding) - Snom standard black
Ra 3. 15
08. Back cabinet
ABS (Injection molding) - graphite
Ra 3. 15
09. Battery door
ABS (Injection molding) - graphite
Ra 3. 15
10. Pin button
Rubber (Injection molding) - graphite
Ra 3. 15
11. Charging pin holder
ABS (Injection molding) - graphite
CSP / SNOM M45R SC HS
6
7
8
9
10
1
2
3
4a
11
5
4
1a
illustration scale 50%
PART DESCRIPTION
COLOUR
TEXTURE/FINISH
Mickey Law | 22. Jan . 2019 | Revision 1.0
03. Lens
Rubber (Injection molding) - Transparent - Milky white
Matte
Ra 3. 15
Matte
04. Keys
Ra 3. 15
06. Antenna
PMMA (Injection molding) - Transparent
Rubber spray - 1st - Pantone Cool grey 3C / 2nd - Snom standard black
Rubber spray - 1st - Pantone Cool grey 3C / 2nd - Snom standard black
Laser etching on 2nd spray ( Legends , )
Silkscreen on the top ( ) - Pantone 361C, ( ) - Pantone 485C
Silkscreen on the top ( , , , , , , , ) - Pantone Cool grey 3C
Rubber (Injection molding) - Snom standard black
High gloss
ABS (Injection molding) - graphite
ABS (Injection molding) - Snom standard black
SPI B-1
SPI A-1
PMMA (Injection molding) - Transparent - Milky white - backlit
High gloss
01. Front cabinet
01a. LCD frame
02. LED
Silkscreen on the top ( ) - Pantone 8001C
Silkscreen on the top ( ) - Pantone 361C, ( , ) - Pantone 485C
Rubber (Injection molding) - Transparent - Milky white
04a. Keys - laser etching
05. Side rim
ABS (Injection molding) - graphite
Ra 3. 15
07. Belt clip
ABS (Injection molding) - Snom standard black
Ra 3. 15
08. Back cabinet
ABS (Injection molding) - graphite
Ra 3. 15
09. Battery door
ABS (Injection molding) - graphite
Ra 3. 15
10. Pin button
Rubber (Injection molding) - graphite
Ra 3. 15
11. Charging pin holder
ABS (Injection molding) - graphite
CSP / SNOM M45R SC HS
6
7
8
9
10
1
2
3
4a
11
5
4
1a
2. Gently push the pin into the hole until you hear a click.
3. Remove the pin.
Your handset will power on after five seconds.
From now on, you can turn your handset off/on by pressing and
holding the
OFF/CANCEL
button on the handset.
DRAFT
