Snom M10 KLE Скачать руководство пользователя

Страница: 73 / 76

10 If you wish to incorporate parts of the

Program into other free programs whose

distribution conditions are different, write to

the author to ask for permission For software

which is copyrighted by the Free Software

Foundation, write to the Free Software

Foundation; we sometimes make exceptions

for this Our decision will be guided by the

two goals of preserving the free status of

all derivatives of our free software and of

promoting the sharing and reuse of software

generally

NO WARRANTY

BECAUSE THE PROGRAM IS

LICENSED FREE OF CHARGE, THERE IS

NO WARRANTY FOR THE PROGRAM, TO

THE EXTENT PERMITTED BY APPLICABLE

LAW EXCEPT WHEN OTHERWISE STATED

IN WRITING THE COPYRIGHT HOLDERS

AND/OR OTHER PARTIES PROVIDE THE

PROGRAM „AS IS"WITHOUT WARRANTY

OF ANY KIND, EITHER EXPRESSED OR

IMPLIED, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE THE ENTIRE RISK

AS TO THE QUALITY AND PERFORMANCE

OF THE PROGRAM IS WITH YOU SHOULD

THE PROGRAM PROVE DEFECTIVE, YOU

ASSUME THE COST OF ALL NECESSARY

SERVICING, REPAIR OR CORRECTION

IN NO EVENT UNLESS REQUIRED

BY APPLICABLE LAW OR AGREED TO IN

WRITING WILL ANY COPYRIGHT HOLDER,

OR ANY OTHER PARTY WHO MAY MODIFY

AND/OR REDISTRIBUTE THE PROGRAM

AS PERMITTED ABOVE, BE LIABLE TO YOU

FOR DAMAGES, INCLUDING ANY GENERAL,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL

DAMAGES ARISING OUT OF THE USE

OR INABILITY TO USE THE PROGRAM

(INCLUDING BUT NOT LIMITED TO LOSS

OF DATA OR DATA BEING RENDERED

INACCURATE OR LOSSES SUSTAINED BY

YOU OR THIRD PARTIES OR A FAILURE

OF THE PROGRAM TO OPERATE WITH

ANY OTHER PROGRAMS), EVEN IF SUCH

HOLDER OR OTHER PARTY HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES

END OF TERMS AND CONDITIONS

If any portion of this section is held invalid

or unenforceable under any particular

circumstance, the balance of the section is

intended to apply and the section as a whole is

intended to apply in other circumstances

It is not the purpose of this section to induce

you to infringe any patents or other property

right claims or to contest validity of any such

claims; this section has the sole purpose of

protecting the integrity of the free software

distribution system, which is implemented by

public license practices Many people have

made generous contributions to the wide range

of software distributed through that system

in reliance on consistent application of that

system; it is up to the author/donor to decide

if he or she is willing to distribute software

through any other system and a licensee

cannot impose that choice

This section is intended to make thoroughly

clear what is believed to be a consequence of

the rest of this License

8

If the distribution and/or use of

the Program is restricted in certain countries

either by patents or by copyrighted interfaces,

the original copyright holder who places the

Program under this License may add an explicit

geographical distribution limitation excluding

those countries, so that distribution is permitted

only in or among countries not thus excluded

In such case, this License incorporates the

limitation as if written in the body of this

License

The Free Software Foundation

may publish revised and/or new versions of

the General Public License from time to time

Such new versions will be similar in spirit to

the present version, but may differ in detail to

address new problems or concerns

Each version is given a distinguishing version

number. If the Program specifies a version

number of this License which applies to it and

„any later version“, you have the option of

following the terms and conditions either of that

version or of any later version published by the

Free Software Foundation If the Program does

not specify a version number of this License,

you may choose any version ever published by

the Free Software Foundation

Содержание M10 KLE












































































Результаты поиска

Содержание M10 KLE

Отзывы:

Похожие инструкции для M10 KLE

Бренды по названию

Популярные бренды

Snom M10 KLE, Руководство пользователя

Результаты поиска

Содержание M10 KLE

Отзывы:

Похожие инструкции для M10 KLE

Бренды по названию

Популярные бренды