2 •
snom Expansion Module V2.0
This Expansion Module is designed for connection to the snom 320/360/370 VoIP
phone. Please read and adhere to the instructions on setting up and cleaning the
phone in the snom 320/360/370 user manual. They also apply to the Expansion
Module.
Installation procedure
•
Unplug the power connector from the snom phone.
•
Place the telephone and the Expansion Module upside down on a soft
surface so that you can read nameplates from the front (see figure).
The Expansion Module must be placed to the left of the telephone. The
fixing holes in the Expansion Module (1) must be positioned over the
corresponding screw domes on the telephone.
•
Secure the Expansion Module to the telephone with the studs supplied.
•
Connect the connection cable (2) as shown in the figure above.
•
Affix the additional keyboard at the positions marked (3) in the illustration.
Plug the connecting cord into the left jack of the first additional keypad
and into the right jack of the new module. If you add a third additional
English
2
1
1
Ext
