2
snom technology AG
[ F
R E Q U E N T L Y
A
S K E D
Q
U E S T I O N
]
Confi guring snom phones for Mass Deployment
3
[ F
R E Q U E N T L Y
A
S K E D
Q
U E S T I O N
]
provided (e.g. http://www.snomag.de/snom200/snom200.htm). For a short description
of the file format, see below. The setting_server URL can also consist of a {mac}
statement like http://www.snomag.de/snom200/snom200.php?mac={mac}. The MAC
address is a unique identification ID of Ethernet devices. snom devices have the form
000413xxxxxx, where xxxxxx is a hexadecimal number identifying the snom device.
The phone automatically replaces the MAC address with its own mac address before
using the URL. Phone-specific settings can therefore be provided for each phone via
this mechanism. The “setting_server” setting can be set manually via webinterface or
automatically via DHCP (options 66 and 67) and through snom4S SIP proxy.
4. The de facto settings are added. These settings may differ from what has been set up
because DHCP may have changed them. The settings include:
•
the IP address of the device,
•
the net mask,
•
the IP gateway,
•
the hostname,
•
the DNS domain, first and second DNS server,
•
the UTC offset in seconds,
•
the time server,
•
DHCP on or off
Each setting is described by its ‚Name:‘which should be added to the config file followed
by a colon and its specific value. Name is followed by ‚Valid values:‘ where the valid values
are described. Each possible value is bracketed in <>.The brackets must be left out if you are
using the values stored in a config file. ‚Default:‘ shows the value which is set by default after
you have removed all of the settings with a manual update or reset values! Lastly, ‚Description’
gives brief details of each setting. See also the snom4S SIP proxy manual for PNP configuration
via the proxy.
Redirection
redirect_event
Valid values: <all>, <busy>, <none>, <time>
Default: none
Description: Event that causes redirection. <all> redirects always, <none> never, <busy>
when the phone is in use and <time> after a timeout.
redirect_time
Valid values: e.g. <15>
Default: blank
Description: Number of seconds after which the phone will redirect the incoming call.
redirect_number
Valid values: e.g. <tb,sf> or <sip:[email protected];q=0.8,[email protected];q=0.9>.
