8
v2018002
Quick Start Guide A170 Wired DECT Headset
en
Important Information
Safety precautions
Please read these precautions and the instructions on setting up and using the product thoroughly
before using the device. Save this info sheet and do not give the device to third parties without it.
Privacy
. Telephone calls are transmitted between the base station and the headset by radio waves,
so there is a possibility that your wireless headset conversations could be intercepted by radio
receiving equipment within range of the headset. For this reason, you should not think of wireless
headset conversations as being as private as those on corded telephones.
Base Station, power adapter, and rechargeable battery packs
CAUTIONS:
Use only the power converter (AC/DC adapter) delivered with the device. Other power power
supplies may damage or even destroy it.
• EU: Sunstrong International Industrial Ltd., model no. SSA-6W2 EU 6045/6030
• UK: Sunstrong International Industrial Ltd., model no. SSA-6W2 UK 6045/6030
Use only the rechargable batterie packs delivered with the device, model no. BT291865, Li-Ion
Polymer, 3.7V 140mAh 0.5Wh, supplier Synergy Scientech Corp.
• To prevent risk of fire or battery explosion, replace with the correct battery type. Dispose of
used batteries according to the instructions.
Placement of base station and cord, operation of base station and headset
•
Warning
: Install power adapter near the equipment and easily accessible.
• Avoid placing the device‘s cord where people may trip over them. Avoid placing the cord where
it may be exposed to mechanical pressure as this may damage it. If the power supply cord or
the plug is damaged, disconnect the device and contact qualified service personnel.
• The device is for indoor installation only.
Not for outdoor installation!
• The operational temperature is between 0 °C to +50 °C (32 °F to +122 °F), humidity not excee-
ding 95% and non-condensing.
• Do not install product in rooms with high humidity (for example, in bathrooms, laundry rooms,
damp basements). Do not immerse product in water and do not spill or pour liquids of any kind
onto or into any parts of it. If the product comes in contact with any liquids, unplug any line or
power cord immediately. Do not plug the product back in until it has dried thoroughly.
• Do not install product in surroundings at risk for explosions and do not use the handset in such
surroundings (paint shops, for example).
Do not use the headset if you smell gas or other
potentially explosive fumes!
• Medical devices might be adversely affected. Please consider the technical ramifications when
installing the devices in a doctor‘s office, for example.
• Warning
: The headset contains a magnet and may attract small dangerous objects such as
needles or pins. Please ensure before each use that no such objects are present.
• Potential TV interference
. Some wireless headsets operate at frequencies that may cause
interference to TVs and VCRs. To minimize or prevent such interference, do not place the base
stationof the wireless headset near or on top of a TV or VCR. If interference is experienced,
moving the wireless headset farther away from the TV or VCR will often reduce or eliminate the
interference.
If you have an implanted pacemaker
• Do not use if you have an implanted pacemaker unless the pacemaker manufacturer‘s
directions expressly permit the use of devices emitting pulsating radio frequency signals.
Always follow the manufacturer‘s directions!
