Snom 370
Quick User Guide
Basic Phone Features
MAKING A CALL
Using the handset:
- Pick up the handset, the yellow line
indicator abd a steady red Call Indication
LED will light, dial the desired number.
Press the
Confirm key to complete
the call.
Using the Speaker Phone:
- With the handset on-hook, press
or the line key (solid yellow LED when
pressed). Dial the desired number.
- Press the
Confirm key to complete
the call.
- Alternatively you may dial the number
first then press
to complete the
call.
Using the (optional) Headset:
- Press
to switch the phone to
headset mode.
- Press
4 times to enter Setup / Use
headset Device -> <On>. The
icon will
appear in the phone display.
. Repeat the process to turn off or press
the Speaker button to toggle between
headset and speaker mode.
- Dial the desired number and press the
Confirm key to complete the call or
press the line key (solid yellow LED when
pressed).
ANSWERING A CALL
An incoming call is indicated by an audible
ringer and a blinking (yellow) line indicator
and a flashing red Call Indication LED.
Using the Handset:
- Pick up the handset.
Speakerphone Mode:
- Press
, or with the handset on
hook press the line key with the active
indicator (yellow blinking), or the
Confirm
key.
Using the (optional) Headset:
- Press
to switch the phone to
headset mode. The
icon will appear in
the phone display. You may either press
the
key, blinking line indicator or
the
Confirm
key to answer your call.
In all cases the active call will appear on
the display showing call duration and caller
ID.
ENDING A CALL
- Replace the handset, or if in speaker
phone mode press the
Cancel
key,
or press
. If you are using the
phone in
mode press the
Cancel
key to end your call.
REDIAL
To redial last number press
twice.
To redial previously dialed numbers
press
. A list of recently dialed
numbers will be displayed with the most
recent at the top of the list. Use the
navigation keys to move through the list.
Press the
Confirm
key over a
displayed or highlighted entry to complete
the call.
MICROPHONE MUTE
During a call press
or the
Mute
soft key so that the other party cannot hear
you. The
icon is displayed.
Press
again or the
Unmute
soft key to
resume audio.
HOLDING A CALL
During a call press
. The call will be
placed on hold, the yellow line key
indicator will flash slowly, and a slow
flashing red Call Indication LED.
Hold
will
be indicated on the phone display. The
caller on hold will hear Music or Message
on hold if enabled on your system.
To resume the call press
again,
the flashing
line
key or press the
Confirm
key.
Your phone will handle multiple calls on
hold. Press
to display all calls on
hold. Use the
navigation keys to move
through the list. Press the
Confirm
key or
over a displayed or
highlighted entry to retrieve the call from
hold.
VOICE MAIL
The message waiting light will flash red to
indicate that a new message(s) is waiting.
When you lift the handset Stuttering Dial
Tone is played.
- To listen to voice messages
key
- Alternatively you may press the
VMail
soft key as indicated on the phone
display.
TRANSFERING A CALL
Blind Transfer (Transfer the call without
announcement):
- During a call, press
. The caller
on hold will hear Music or Message on
hold if enabled on your system.
- Dial the number you want to transfer the
call to then press the
Confirm
key to
complete the transfer.
Transfer (Announced):
- Place your caller on hold by
pressing
. Your caller will hear
Music or Message on hold if enabled on
your system.
- Dial the number you want to transfer the
call to then press the
Confirm
key.
- When the called party answers, announce
the call, press
twice or
to
complete the transfer.
- Press
to cancel the transfer i.e. the
called party does not wish to accept the call.
