Snell XA2900, Руководство пользователя

Страница: 9 / 12

7
Using one amplifier for each speaker
Make sure that the amplifiers are identical.
1. Unscrew both sets of terminals and remove the jumper
straps.
2. Connect the cables from the bottom set of terminals to
the first amplifiers right channel.
3. Connect the cables from the top set of terminals to the
first amplifiers left channel.
4. Repeat steps 2 and 3 above for the second amplifier.
amplifier
XA 2500
Using with a multichannel Surround Processor
1. Select the Large setting on your receiver or processor
for your main speakers. This routes all bass information
(typically below 100Hz) to your XA Towers.
2. Match the sound levels of each speaker. Your home
theater system most likely includes a test signal that
simplifies level matching. Refer to the instructions
provided with these electronics.
amplifier
surround processor
preamp
outputs
front surround sub
center
input
L
R
XA 2500
speaker
terminal
jumpers