6
W A L L O R C E I L I N G M O U N T I N G Y O U R S R . 5 S U R R O U N D S
Please Note:
Installation of surround speakers requires a thorough understanding of construction tools and procedures. We recom-
mend you consult a knowledgeable installer if you are unsure of the physical properties behind your wall or ceiling.
Mounting the Bracket When Using the Machine
Screws and Toggle Wings
1. Drill two 9¼16" (13mm) holes using the bracket as a
template. If running wires behind the wall, make a hole
for them as well.
2. Insert the machine screws through the bracket and
thread onto the toggle wings before penetrating the wall.
3. Level the bracket and tighten the screws.
4. Connect the wires.
5. Place the SR.5 on the bracket and slide down until you
hear a locking “click.”
3" #10 machine bolts
toggle wings
Drill two 9¼16" (13mm)
holes for the toggle wings.
Wires connect to terminals on
back of SR.5. Tuck excess
wire into the recess on back
of the speaker.
Level the bracket before
hanging the speaker.
Place the SR.5 on the
bracket and slide down until
you hear a locking “click.”
Place felt bumpers on back
of the SR.5 to protect your
wall or ceiling.
Mounting on Drywall, Paneling, or Other Hollow
Surfaces
Use the supplied 3" #10 machine screws and toggle wings.
The toggle wings require a 9¼16" (13mm) hole.
Mounting on Wood and Other Solid Surfaces
Use the supplied 2" #8 particleboard screws.
Mounting on Masonry, Adobe, and Similar Surfaces
Consult a knowledgeable installer about proper hardware.
You will obtain best results with #8 screws.
