10
Main
Speakers
Receiver
+
L
R
-
HIGH LEVEL IN FROM AMP
L
+
–
R
+
–
HIGH LEVEL OUT TO MAIN SPEAKERS
#1 PS10mk2
Amplifier
Panel
#2 PS10mk2
Amplifier
Panel
HIGH LEVEL IN FROM AMP
L
+
–
R
+
–
HIGH LEVEL OUT TO MAIN SPEAKERS
FROM PREAMP
Receiver
#1 PS.10mk2
Amplifier Panel
#2 PS.10mk2
Amplifier Panel
L
R
AMP
IN
PREAMP
OUT
"Y"
ADAPTERS
L
R
TO AMP
L
R
LOW LEVEL IN
HIGH PASS OUT
FROM PREAMP
L
R
TO AMP
L
R
LOW LEVEL IN
HIGH PASS OUT
CONNECTING TWO PS.10mk2’s
You may wish to use two PS.10mk2’s, particularly if you are in a large room.
4
Double subwoofers may be wired with either speaker-level or line-level connections.
4
Be sure the Phase Switch is set the same on both units.
Wiring two PS.10mk2’s using speaker-level inputs
Use the ”HIGH LEVEL IN FROM AMP“ binding posts on one subwoofer to daisy chain to the
second PS.10mk2.
Wiring two PS.10mk2’s using line-level inputs
Use "Y" connectors to daisy chain the ”PREAMP OUT“ signal to the input of a second PS.10mk2.
