Vega 30 Router User Manual
Defining User-defined Sources
Vega 30 Web Interface 6.5
Issue1 Revision 1
Page 72
© 2017 SAM
6.5.3.4
To enter Silence for an Audio Channel Source
13. Click in the “Audio 5” column and enter ‘S’.
A drop-down list appears to assist entry. See Figure 50.
14. Select ‘Silence’ in the drop-down list.
The ‘Audio 5’ column entry is done. See Figure 51.
15. (Click
Apply
at the top of the
Source Names
Web page
to apply settings changes
when all settings changes are done.)
6.5.3.5
To enter a Test Tone for an Audio Channel Source
16. Click in the “Audio 6” column and enter ‘T’.
A drop-down list appears to assist entry. See Figure 50.
17. Select ‘979.6Hz’ in the drop-down list.
The ‘Audio 6’ column entry is done. See Figure 52.
18. (Click
Apply
at the top of the
Source Names
Web page
to apply settings changes
when all settings changes are done.)
6.5.3.6
To Apply All Changes
19. Click
Apply
at the top of the
Source Names
Web page
.
The changes are applied and a brief message appears on the web page, see Figure
53.
Figure 50 Drop-Down ‘Auto-complete’ List
Figure 51 Audio 5 Column Entry Complete
Figure 52 Audio 6 Column Entry Complete
Figure 53 Changes Applied
