Snell Advanced Media MV-805, Руководство пользователя

Страница: 91 / 139

MV-805 IP Multiviewer User Manual Configuring Orbit for Discovering Out-of-Band Devices Getting Started 2 - IP Routing (Orbit) 8.1
Issue1 Revision 1 Page 91 © 2018 SAM
To ensure that SAM Orbit is using the separate control network of the target IP routing
system:
3. Click the Comms Setup button (top right of the Orbit project screen).

The Comms Setup dialog is shown, see Figure 67.
4. Select the IP Address of the client PC’s network interface that is connected to the
control IP network of the target IP routing system.

(The IP address may already be selected.)
Note: The Names listed in the Comms Setup dialog are determined by the client
PC’s network settings.
Orbit will now additionally use the client PC network interface. This will enable Orbit to detect
out-of-band video IP devices connected to the control IP network, such as the MV-805.
Figure 67 SAM Orbit - Comms Setup Dialog (Example)
List of all of the network interfaces of the client PC.
IP Address
Example, Names of the network interfaces,

as set up on the client PC
Control network selected.