Snell Advanced Media MV-805, Руководство пользователя

Страница: 63 / 139

MV-805 IP Multiviewer User Manual Layout Template RollCall Templates 6.3
Issue1 Revision 1 Page 63 © 2018 SAM
6.3 Layout Template
The RollCall MV-805 Layout screen allows the user to select which multiviewer video wall
layout to apply to each MV-805 multiviewer display output. A user may use a RollCall soft- or
hard-panel to remotely control which video wall layout is used. The on-screen transition
between two wall layouts is selectable; it can be a simple cut or a fade through black.
Video walls are designed in the SAM Orbit application and different wall layouts may be
generated for the same wall. These are all contained within a SAM Orbit multiviewer project.
• Each video wall in a SAM Orbit multiviewer project has a Name property,

which is set to “Wall 1”, “Wall 2” etc.
• Each wall layout in a SAM Orbit multiviewer project has a name

set to “Layout1”, “Layout2” etc.
The wall layout to be used for each wall can be selected in the respective drop-down box of
the RollCall Layout screen. See Figure 40.
To change a wall layout:
1. Select the on-screen transition for the layout transition:

Tick “Fade Through Black” for a fade through black, untick for an on-screen cut.
2. For the corresponding Wall on the Layout template,

enter the name of the next wall Layout (case sensitive).
3. Click S to effect the layout change on the multiviewer.
Note:
Layout names are case-sensitive and are set to “Layout1”, “Layout2” etc.
Figure 40 RollCall Layout Screen
Note:
“S” and “P” buttons - After entering information in each text box, always click on the
adjacent “S” button or press “return” to locally save the new setting. Do this for each text
box. (Note: Clicking on the “P” button will return the setting to its preset default value).
“S” - Locally save new setting value (or press “return”).
“P” - Locally save default setting value.
Note:

MV-805-32: Eight walls are shown.

MV-805-16: Four walls are shown.