Snell Advanced Media MV-805, Руководство пользователя

Страница: 15 / 139

MV-805 IP Multiviewer User Manual Functionality Architecture and Signal Flow Product Overview 3.3
Issue1 Revision 1 Page 15 © 2018 SAM
3.3 Functionality Architecture and Signal Flow
A turnkey MV-805 is based on a COTS server with high-capacity IP network interfaces. A
SAM IP Multiviewer software application runs on the server and is fully hardware-optimized. It
is this software application that provides the MV-805 IP Multiviewer with its “multiviewer
functionality”.
3.3.1 Input and Output Connections
The MV-805 IP Multiviewer unit’s main input/output connections (see Figure 2) comprise:
• Network Ports:
• Up to four high-performance “Media” IP network ports.
• Up to two “control” network ports.
• Power:
• Up to two AC power connections.
The MV-805 unit is “IP in” and “IP out” and must be connected to a media IP routing system.
All the video inputs and the multiviewer video wall display output(s) are video IP stream(s)
and they are carried on high-performance 100G networks, media fabrics “A” and “B”.
The MV-805 generates multiviewer video wall image(s) from its input video streams. The
video walls are provided as one or more video IP streams over the media IP routing system.

Video wall layout information is pushed to the MV-805 from the SAM Orbit video wall design
tool over a control IP network.
The two mains power supply connections provide the unit with power supply redundancy.
Figure 2 Main Input and Output Connections of a MV-805 Turnkey Unit