BTP-R990 User’s Manual
- 9 -
4.7.2 Load/replace paper roll
1) Turn off the printer;
2) Open the printer top cover;.
3) Place a paper roll in the paper cabinet;
4) Pull out the paper end of paper roll, close top cover, and tear off the surplus portion of the paper.
Caution:
Adjust the paper guide according to paper specification: adjust the paper guide to Max. width and
place paper roll in the paper cabinet; rotate the thumb wheel to adjust the paper guide to suitable
place(1mm gap between paper roll and paper guide should be reserved, to avoid paper roll being
snapped ); the paper roll rotation direction should meet printer requirements.
Confirm that the paper is rolled tightly on the paper roll, otherwise, paper jam or other fault may
occur;
Paper roll should be placed stably in the paper cabinet without incline, or the printing will be
affected.
