BTP-3200E/3300E Product Specification
- 5 -
3.4 Trademark and nameplate
1) Product
nameplate
2) Product
trademark
3) Warning
symbol
3.5 Mounting mode
Place the printer flat on the operation table, which must be waterproof, dampproof and dustproof.
Figure 3.5
Caution:
The incline angle should not exceed ±15°and only the paper feed direction is allowed. The incline
in other directions is not allowed;
Keep the printer far away from water source, electrical equipments with big power consumption
and heat resources;
Do not place the printer in the place exposed to vibration and impact;
Keep the printer safely grounded;
It is recommended to keep at least the space as shown in figure 3.5-1, in order to guarantee the
reliability and operational convenience of the printer.