Snapper SW20 Series, Руководство оператора

Страница: 19 / 48

17
Operation
Driving The Mower
Before attempting to drive the mower make sure
you have read the
Features and Controls
section and
understand the location and function of the controls.
The hydrostatic transmission has an infinite number
of speeds between full speed forward and reverse,
with the faster speeds being achieved by moving the
forward speed control lever and reverse speed control
levers farthest in the direction of travel.
For normal use, the throttle should be kept fully open and
the ground speed of the machine determined by the forward
speed control lever. When transporting the machine or when
loading or unloading from a truck or trailer, partial throttle
should be used to slow the reaction time of the controls and
reduce noise.
Practice maneuvering the machine at a slow engine speed on
level ground with the PTO switch in the “OFF” position until
you are familiar with the controls.
To Move Forward and Set Forward Speed
1. Disengage the parking brake.
2. Gently move the forward speed control lever (A,
Figure 11) forward until desired speed is achieved.
To Move Backward
1. Disengage the parking brake.
2. Gently squeeze both reverse speed control levers
(
B
) evenly, until desired speed is achieved.
To Slow or Stop Machine
1. Gently squeeze both reverse speed control levers
evenly to slow the machine.
2. Continuing to squeeze the reverse speed control
levers will stop the machine.
3. Once the machine is stopped, firmly depress the
neutral return pedal to place the transmissions in
neutral.
4. Engage the parking brake.
NOTE: Continuing to squeeze the reverse speed
control levers after the machine is stopped, will cause
the machine to move in reverse.
Turning the Machine
Note: Always reduce speed in a turn.
Turning Left:
Gently squeeze the left hand reverse speed control
lever (
C
). A sharp or gentle turn is determined by the
amount of force applied to the steering control lever.
Turning Right:
Gently squeeze the right hand reverse speed control
lever (
D
). A sharp or gentle turn is determined by the
amount of force applied to the steering control lever.
A
C
D
B
Figure 11. Driving the Mower
A. Forward Speed Control Lever
B. Reverse Speed Control Levers
C. Left Hand Speed Control Lever
D. Right Hand Speed Control Lever
Not
for
Reproduction