Simplicity / Snapper ZTR
8/2007
3
TP 300-7337-01-CH-SMN
Quick Setup List -
Page
Setup Procedure
Steps to Perform
4
Uncrating
❏
Remove crate & banding.
❏
Place transmissions in PUSH position & roll off skid.
4
Battery Activation
&
❏
Charge the battery
Installation
❏
Test battery with hydrometer or load-tester.
❏
Install & secure battery.
5
Rider Assembly
❏
Install the seat and connect the seat switch
❏
Install ground speed control levers.
6
Check Fluid Levels
❏
Fill & check Engine oil level.
❏
Check transmission fluid level.
❏
Reduce & check tire pressures
(Front tires 40 psi, rear tires 15 psi).
7
Mower Assembly
❏
Torque mower blade bolts.
7
Lubrication
❏
Lubricate all grease & oil points.
8
SAFETY CHECKS
❏
Check for LOOSE HARDWARE.
❏
Check all OPERATOR CONTROLS.
❏
Test PARKING BRAKE.
❏
Perform MOWER BLADE STOPPING CHECK.
(Blade must stop within 5 seconds!)
❏
Perform SAFETY INTERLOCK SYSTEM CHECK.
8
Burnish Electric Clutch
❏
Burnish electric clutch
(run for 15 seconds, repeat 10 times).
❏
Repeat MOWER BLADE STOPPING CHECK.
(Blade must stop within 5 seconds!)
