Snapper SCRAMBLER SZT18336BVE, Инструкции по безопасности и руководство оператора

Страница: 6 / 36

6
Section 1 - FAMILIARIZATION
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for operators of the
SNAPPER SCRAMBLER ZERO-TURN MOWER. Its
purpose, aside from recommending standard operating
procedures and routine service requirements, is to
promote SAFETY through the use of accepted operating
practices. Read, Understand and Follow the IMPORTANT
SAFETY INSTRUCTIONS on Pages 2 - 4 of this manual
and All SAFETY messages on the machine and its
attachments before operating. SNAPPER recommends
returning the machine to an authorized SNAPPER dealer
annually for inspection and addition of any new devices,
which might upgrade the safety of the mower.
1.2 NOMENCLATURE
The nomenclature drawing above, Figure 1.1, shows the
essential parts of the machine. It is recommended that
all operators of this equipment become thoroughly
familiar with the controls, components, and operation of
this machine before operating. Specific details involving
the engine are found in the separate engine owner’s
manual. Study these manuals before operating and
keep both handy for future reference. For the nearest
SNAPPER dealer in your area, check the yellow pages
under the heading LAWN MOWERS. For engine parts
and service, look for the engine manufacturer’s dealers
under the heading, ENGINES - gasoline.
RIGHT MOTION
CONTROL LEVER
LEFT CONTROL PANEL
OPERATOR’S
SEAT
IGNITION
SWITCH
DECK
DISCHARGE
DEFLECTOR
FOOT
REST
CUTTING DECK HEIGHT
ADJUSTMENT HANDLE
IMPORTANT! The figures and illustrations in this
manual are provided for reference only and may
differ from your specific model. Contact your
Snapper dealer if you have questions
.
ARM REST (2)
CUTTING DECK
RIGHT CONTROL
PANEL
LEFT MOTION
CONTROL LEVER
FLOOR
PAN
FUEL TANK
BLADE
SWITCH
PARKING
BRAKE
ENGINE SPEED &
CHOKE CONTROL