Snapper S200XBV3261 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 52

Snapper S200XBV3261 Скачать руководство пользователя страница 2

WARNING

The engine exhaust from this product contains
chemicals known to the State of California to
cause cancer, birth defects, or other reproductive
harm.

WARNING

Battery posts, terminals, and related accessories
contain lead and lead compounds - chemicals
known to the State of california to cause cancer
and reproductive harm. Wash hands after
handling.

Thank you

for purchasing this quality-built Snapper Pro product. We’re pleased that you’ve placed your confidence

in the Snapper Pro brand. When operated and maintained according to the instructions in this manual, your
Snapper Pro product will provide many years of dependable service.

This manual contains

safety information to make you aware of the hazards and risks associated with this machine

and how to avoid them. This machine is designed and intended to be used and maintained according to the manual
and operated by trained professionals for finish cutting of established lawns and is not intended for any other
purpose. It is important that you read and understand these instructions thoroughly before attempting to start or
operate this equipment.

Save these instructions for future reference.

Briggs & Stratton Yard Power Products Group
Copyright © 2010 Briggs & Stratton Corporation

Milwaukee, WI, USA. All rights reserved.

The Snapper Pro logo is a trademark of Briggs & Stratton
Corporation Milwaukee, WI, USA.

Contact Information:

Briggs & Stratton Yard Power Products Group
5375 N. Main St.
Munnsville, NY 13409-4003
(800) 933-6175
www.SnapperPro.com

See

Features and Controls

for the location of Identification

Numbers

PRODUCT REFERENCE DATA

Unit Model Number

Unit SERIAL Number

Mower Deck Model Number

Mower Deck SERIAL Number

Dealer Name

Date Purchased

ENGINE REFERENCE DATA

Engine Make

Engine Model

Engine Type/Spec.

Engine Code/Serial Number

Not

for

Reproduction

«
1
2
3
4
...
»

Содержание S200XBV3261





















































Отзывы:

Нет отзывов