Snapper IMAGE 204094, Руководство по эксплуатации

Страница: 9 / 12

TROUBLESHOOTING
• No sound from the receiver
Check all connections to ensure that all the cords
are firmly connected at the back of the base and TV.
Also, confirm that the receiver is not more than 100
feet away from the base.
• There is sound from the TV speaker, but no sound
from the receiver
Check your TV speaker setting by going into the
TV Menu, using your TV remote and ensuring the
TV is sending audio signals to the base.
• The Low Battery/Charging indicator keeps blinking
on the receiver
This indicates that the battery is low and needs to
be placed on the base for recharging. When fully
charged, the blinking will stop (in about 3 hours).
If the blinking does not stop, check to make sure
the receiver is firmly connected and properly aligned
to the base.
CLEANING AND MAINTENANCE
Unplug the AC Adapter from the wall. Then, use a dry,
soft cloth to clean and dust the outside surfaces and
the charging contacts on the Base. Do not immerse
the Receiver in water.
SPECIFICATIONS
Transmission:
2.4 GHz Radio Frequency
Speakers: 2x5W Class D
Speaker Battery: Built-in Lithium Ion Battery
Operating Range: Over 30m (100 feet)
in an open field
A C Adapter Power: 100-240VAC/50-60 Hz input;
9VDC 1.5A output
Listening Time: About 8 hours (at 50% volume)
Dimensions: 24cm x 17cm x 8cm
(9”x7”x3.25”)
Weight: 800g. (1.7 lbs.)
(Final product may vary)
Wireless TV Speaker • 9