19
DECAL IDENTIFICATION
(7) GROUND SPEED:
Shows direction of movement
and the ability to select one of three ground speeds by
moving the lever. The number 3 (Rabbit) indicates the
top speed, number 2 indicates the medium speed and
the number 1 (Turtle) indicates the slowest speed.
(8) HEIGHT CONTROL INSTRUCTION:
Shows
direction of movement of HEIGHT ADJUST HANDLE to
select a change in height if cut from highest cutting
height (clockwise) to the lowest height (counter-
clockwise). Note that there is a total of eleven heights of
cut.
(9) NOISE CONTROL:
This unit is certified to be within
the 100 dBA sound power limit at the specified Engine
RPM.
(10) EUROPEAN PERFORMANCE:
Maximum level of
vibration measured at the operators hand is 23.4
m/sec2.
(11) OPERATOR PRESENCE CONTROL:
Pull control
against handle to start engine and blade. Release
control to stop engine and blade.
(12) GROUND DRIVE:
Pull lever against handle to
engage drive. Release lever to disengage drive.
HEIGHT
CONTROL
DECAL
P/N 2-8454
EUROPEAN NOISE
CONTROL DECAL
74135
EUROPEAN
COMMUNITY
DECAL
29776
OPERATOR PRESENCE
CONTROL DECAL
P/N 2-9431
GROUND DRIVE
DECAL
P/N 2-9432
GROUND
SPEED
DECAL
P/N 4-7158
1
st
SLOW SPEED
(TURTLE)
2
nd
MEDIUM SPEED
3
rd
TOP SPEED
FORWARD MOTION
FAST SPEED
(RABBIT)
