Snapper CRP216019KWV, Инструкции по безопасности и руководство оператора

Страница: 10 / 32

10
Section 2 - OPERATING INSTRUCTIONS
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP
engine and blade. Disconnect spark plug wire and
secure away from spark plug. Engine and
components are HOT. Avoid serious burns, allow
sufficient time for all components to cool.
2.8 INSTALLATION OF GRASS BAG ADAPTER
(Optional Accessory on Some Models)
STEP 1:
Remove recycling cover. Refer to Section
“Recycling Operation”.
STEP 2: Install grass bag adapter to the deck in place of
recycling cover, making sure that: 1) hole on outside front
of adapter fits onto stud in front of discharge opening
where front of recycling cover was originally installed, 2)
slot on top of adapter slips under restraining nut on top of
deck (under right front corner of engine), and 3) slot on
bottom rear of adapter slips onto stud behind rear of
discharge opening, where rear of recycling cover was
originally secured. See Figure 2.11. Install
internal/external tooth lock washers and knob nuts on
studs and tighten securely.
STEP 3: Route recoil rope around outside of rope guide
pulley. See Figure 2.11. (NOTE: Recoil rope may need to
be slackened. Refer to “Handle Assembly”.)
FIGURE 2.11
STEP 4: Attach Bag Adapter Standoff between rope
guide pulley assembly and engine recoil. See Figure
2.12.
A. Remove right rear bolt from engine recoil cover.
B. Remove torx screw and nut securing rope guide
pulley to bracket on bag adapter.
C. Lay standoff between bolt holes in engine recoil
cover and bag adapter pulley bracket. NOTE:
position standoff so that bent end is toward engine
recoil cover.
D. Flip pulley over so that flange of steel bushing is
under pulley. (The bushing will act as a washer
between the pulley and standoff.)
E. Reassemble pulley to bag adapter, and install
supplied replacement bolt, fitted with thread sleeve,
into recoil cover. Tighten all hardware securely.
FIGURE 2.12
(Continued Next Page)
ROUTE RECOIL ROPE
AROUND PULLEY
BEND
STANDOFF
ROPE GUIDE PULLEY
RECOIL
ROPE
SECURE
ADAPTER
TO DECK
REPLACEMENT
BOLT WITH
THREAD SLEEVE