background image

Thank you

for purchasing Snapper Pro commercial mowing equipment. Please take a few minutes to read this limited warranty information. It con-

tains all the information you will need to have your Snapper Pro mower repaired in the unlikely event that a breakdown covered by this limited warranty
should occur.

Owner's Responsibilities

- As a condition to our obligations under this limited warranty, you shall have read the operator's manual and you shall have

completed and submitted to Snapper Pro, within 20 days from the date of purchase, the Snapper Pro Product Registration. You must properly service
and maintain your Snapper Pro product as described in the operator's manual. Such routine maintenance, whether performed by a dealer or by you, is
at your expense. The Snapper Pro equipment, including any defective part covered by this limited warranty, must be returned to an authorized Snapper
Pro dealer within the warranty period for warranty service. This limited warranty extends only to equipment operated under normal conditions and in
accordance with Snapper Pro' instructions.

Warranty Start Date

- The limited warranty coverage begins on the day you buy your new Snapper Pro commercial mowing equipment. An authorized

Snapper Pro dealer will assist you in filling out a Snapper Pro Product Registration with specific information for the model you purchase and your per-
sonal information, which must be returned to Snapper Pro.

Limited Warranty

- The limited warranty, set forth below, is a written guarantee by Snapper Pro, during the warranty period, to repair or replace parts

which have a substantial defect in materials or workmanship. The warranty is "limited" because it is for a specified period of time, applies to the origi-
nal purchaser only, and is subject to other restrictions.

SNAPPER PRO LIMITED WARRANTY

Snapper Pro warrants, in accordance with the provisions below, to the original purchaser only, for the periods described below that the commercial
mower shall be free from substantial defects in material or workmanship under normal use and service. If you wish to file a claim under this limited
warranty, you must provide prompt notice of your claim to an authorized Snapper Pro dealer during the warranty period. Snapper Pro' obligation under
this limited warranty is, at Snapper Pro' option, to repair or replace any part or parts of the mower, which, in the judgment of Snapper Pro, are found to
be defective and covered by this limited warranty. An authorized Snapper Pro dealer will repair or replace the defective part or parts, at the dealer's
place of business, at no charge for the labor or parts. This limited warranty applies only to mowers sold in the United States and Canada and is sub-
ject to the following limitations.

Covered Parts

Warranty Period

All Mowers

2-years (24 months) from date of retail purchase by the original
purchaser for parts & labor (90 days for rental mowers)
(Except as noted below*)

*Belts, Tires, Brake Pads

90 days from date of retail purchase by the original purchaser

And Hoses, Battery, Blades

*Attachments

1 year from date of retail purchase by the original purchaser

*Engine

If the engine manufacturer provides any warranty on the mower's engine, Snapper Pro will assign that 
warranty to the original purchaser of the mower if such assignment is reasonably practicable. Please refer to 
the engine manufacturer's warranty statement, if any, that is included in the owner's packet. We are not 
authoized to handle warranty adjustments or repairs on engines. Snapper Pro offers 

NO WARRANTY

on 

mower engines. Snapper Pro does not guarantee or represent that any engine manufacturer will comply with 
the terms of its warranty.

Items and Conditions Not Covered

This warranty does not cover, and Snapper Pro makes 

NO WARRANTY

regarding, the following:

• Mowers or their parts if a complete and accurate Snapper Pro Product Registration has not been received by Snapper Pro.
• Loss or damage to person or property other than that expressly covered by the terms of this limited warranty.
• Pickup and delivery charges and risk of loss or damage in transit to and from any authorized Snapper Pro dealer.
• Any damage or deterioration due to normal use, wear and tear, or environmental or natural elements, or exposure.
• Cost of regular maintenance service or parts, such as but not limited to, filters, fuel, lubricants, tune-up parts, and adjustments.
• Claims arising due to failure to follow Snapper Pro' written instructions, or improper storage or maintenance.
• Any repairs necessary due to use of parts, accessories or supplies, including gasoline, oil or lubricants, incompatible with the mowing equipment,

or other than as recommended in the operator's manual or other written operational instructions provided by Snapper Pro.

• Use of non-Snapper Pro approved parts or accessories.
• Any overtime or other extraordinary repair charges or charges relating to repairs or replacements.
• Rental of like or similar replacement equipment during the period of any warranty, repair or replacement work.
• Loss of revenue, time or use of the mowing equipment.
• Travel, telephone or other communication charges.
• Damage from continued use of defective mowing equipment.
• Freight charges on replacement parts.
• Any mowing equipment or part which, in the judgment of Snapper Pro, has been altered or tampered with in any way or has been subjected to

misuse, abuse, abnormal usage, unauthorized repair, neglect or accident, damage in transit, or has had the serial numbers altered, effaced or
removed.

• Any equipment, part or item not mentioned under "Covered Parts," above.

General Conditions

Snapper Pro is continually striving to improve its products, and therefore reserves the right to make improvements or changes without incurring any
obligation to make changes or additions to products sold previously. Any oral or written description of Snapper Pro products is for the sole purpose of
identifying the products and shall not be construed as an express warranty. No warranty claim shall give rise to a right for the purchaser to cancel or
rescind any sale. No person is authorized to make any warranty or assume for Snapper Pro any liability not strictly in accordance with this limited war-
ranty. Any assistance Snapper Pro provides to or procures for the purchaser outside the terms, limitations or exclusions of this limited warranty will not
constitute a waiver of the terms, limitations or exclusions of this limited warranty, nor will such assistance extend or revive the limited warranty.
Snapper Pro will not reimburse the purchaser for any expenses incurred by the purchaser in repairing, correcting or replacing any defective products
except for those incurred with Snapper Pro' prior written permission and in accordance with this limited warranty.

Snapper Pro' sole and exclusive liability with respect to this limited warranty, and the purchaser's exclusive remedy, shall be repair or replacement as
set forth herein. All warranty work must be performed by an authorized Snapper Pro dealer using only Snapper Pro approved replacement parts.

SNAPPER PRO SHALL HAVE NO LIABILITY FOR ANY OTHER COST, LOSS OR DAMAGE, INCLUDING BUT NOT LIMITED TO, ANY INCIDEN-
TAL, COMPENSATORY, INDIRECT, PUNITIVE, SPECIAL OR CONSEQUENTIAL LOSS OR DAMAGE. SNAPPER PRO' AGGREGATE LIABILITY
WITH RESPECT TO A DEFECTIVE PRODUCT OR PART SHALL BE LIMITED TO AN AMOUNT EQUAL TO THE MONIES PAID BY THE PUR-
CHASER FOR THAT DEFECTIVE PRODUCT OR PART. THIS LIMITED WARRANTY, AND SNAPPER PRO' OBLIGATIONS HEREUNDER, ARE
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRAN-
TY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. SNAPPER PRO SHALL NOT BE
LIABLE TO THE PURCHASER, OR TO ANYONE CLAIMING UNDER THE PURCHASER, FOR ANY OTHER OBLIGATIONS OR LIABILITIES,
INCLUDING, BUT NOT LIMITED TO, OBLIGATIONS OR LIABILITIES ARISING OUT OF BREACH OF CONTRACT OR WARRANTY, NEGLIGENCE
OR OTHER TORT OR ANY THEORY OF STRICT LIABILITY, WITH RESPECT TO SNAPPER PRO PRODUCTS OR SNAPPER PRO' ACTS OR
OMISSIONS OR OTHERWISE.

It is the express wish of the parties that this agreement and any related documents be drafted in English. Il est la volonté expresse des parties que
cette convention et tous les documents s'y rattachent soient rédigés en anglais.

Snapper Pro - a division of Briggs & Stratton Power Products Group, LLC.

Owner's Limited Warranty Information

(Effective 08/01/2007)

Not 

for  

Reproduction

Содержание 5900508





















































Отзывы: