2
SETUP
NEW CONSTRUCTION INSTALL
Episode speaker installations can be simplified by using Episode
Pre-Construction Brackets (sold separately). These are installed prior to
drywall and allow for precise placement of the speaker.
Remember to secure the wiring within reach of the bracket for easy access.
INTRODUCTION
Thank you for purchasing Episode® speakers. To complete installation,
follow these four main steps:
Setup, Connect, Secure, and Fine Tune
.
Don’t forget to plan! Visit our website for design recommendations and
speaker calculators.
IN-WALL
IN-CEILING
EXISTING CONSTRUCTION INSTALL
Use the supplied template to make a cutout for the speaker. If you are
installing the speaker near adjacent objects, allow space for the bezel,
or cut the hole in two steps before placing the speaker in the ceiling.
1.
Cut the drywall at a 45° angle so that if the speaker is too close to an
obstruction, you can easily ‘plug’ the hole.
2.
If there are no obstructions, cut the drywall again, this time at a 90° angle.
3.
Insert the speaker into the cutout.
