Snap-On Zeus Скачать руководство пользователя

Страница: 39 / 235

Getting Started - Diagnostic Suite Program

Menu Icon

3.4 Toolbar Icons

Operation of the icons located on the toolbar are described in the table below:

3.5 Menu Icon

The Menu icon on the Toolbar at the base of the display screen provides
various system information. See below for additional information.

3.5.1 Help

Basic menu options, which are available for all modules, include:

•

Version Info

- This option opens a window showing the version of the software

and a copy of the Software License Agreement. Select OK to close the window.

•

Activation Status

- This option opens a dialog box with version and licensing

details for the system, and activation status for the diagnostic tool and all other
modules.

Icon

Description

Home

Selecting this icon returns you to the Home screen from any test. See

Home Screen Layout

on page 30

Desktop

Selecting this icon toggles the Windows taskbar on/off at the bottom of
the screen, and allows you access to the Windows desktop.

Menu

Selecting this icon opens a menu that provides information and basic
operations and features for the current screen. See

Menu Icon

page 32

Technical

Service Bulletins

Provides Technical Service Bulletin information (if available) for the
identified vehicle. See

TSBs (Technical Service Bulletins)

page 153

Change Vehicle

The currently identified vehicle is shown to the right of the icons,
selecting allows you to change the identified test vehicle.

View Record

Selecting the icon opens an editable worksheet of vehicle records.

Compact Scan

Module

Hardware Status

Indicates the connectivity status of the Compact Scan Module. Icon
changes depending on status.
See

Checking Paired Status

on page 38

for icon descriptions.

Scope Module

Hardware Status

Indicates the connectivity status of the Scope Multimeter Module. Icon
changes depending on status. See

Checking Paired Status

page 38

for icon descriptions.

Wi-Fi Icon

Indicates the connectivity status of your Wi-Fi connection. See

Wi-Fi

Setup

on page 13

for icon descriptions.

Icon

Description

Содержание Zeus












































































































































































































































Результаты поиска

Содержание Zeus

Отзывы:

Похожие инструкции для Zeus

Бренды по названию

Популярные бренды

Snap-On Zeus, Руководство пользователя

Результаты поиска

Содержание Zeus

Отзывы:

Похожие инструкции для Zeus

Бренды по названию

Популярные бренды