Snap-On Triton D8, Руководство пользователя

Страница: 124 / 204

Scope Multimeter Operation and Controls
114
z
To set trigger position:
Trigger position (also called trigger level) can be adjusted in two ways:
–
Dragging the trigger marker (
Figure 12-21
) on the touch screen - rough
adjustment
–
Using the trigger position control panel (
Figure 12-21
) - fine adjustment
The trigger marker is indicated by a plus symbol (+) on the display
(
Figure 12-22
). The trigger marker represents the trigger point and is
displayed on the screen when the trigger is turned on.
To roughly position the trigger marker, select and drag it into position using the
touch screen.
4. To more accurately position the trigger marker, select the Trigger Position
Control icon (
Figure 12-22
).
The trigger position control panel opens.
5. Use the directional controls provided, or the thumbpad directional controls to
move the trigger marker into position (
Figure 12-21
). Sweep and vertical scale
values are provided in the trigger position control panel, which gives you the
precise position of the trigger marker.
6. Press the N/X button, to exit.
1— Trigger Marker
2— Trigger Position Control Panel
Figure 12-21
Trigger marker and position controls
1— Trigger Marker (out of range symbol)
2— Waiting for Trigger Message
3— Trigger Position Control Icon
Figure 12-22
1
2
3