Snap-On SOLUS Ultra, Руководство пользователя

Страница: 49 / 78

44
OBD-II/EOBD OBD Diagnose
z
To perform an OBD-II/EOBD Test:
1. Select Start Communications from the OBD-II/EOBD menu.
A vehicle type options list displays:
–
12V Light Duty Vehicle
–
24V Heavy Duty/Goods Vehicle
2. Select an option from the vehicle type list.
A connection message displays.
3. Connect the data cable to the test vehicle, then select Continue .
The scan tool establishes a communication link with the test vehicle, then displays an
information screen that shows how many control modules were detected, which ECM is
communicating, and which communication protocol is being used (
Figure 6-5 ).
Figure 6-5
Sample protocol information screen
4. Select Continue .
A Select Service menu of available tests displays, options include:
–
Readiness Monitors
–
MIL Status
–
Display Current Data ($01)
–
Clear Emissions Related Data ($4)
–
Display Freeze Frame Data ($02)
–
Display Trouble Codes ($03)
–
Display Test Parameter/Results ($05, 06, 07)
–
Request Control of On-Board System ($8)
–
Read Vehicle Identification ($09)
–
Emission Related DTC with Permanent Status ($0A)
IMPORTANT:
All service modes are not supported by all vehicles, so the available menu selections will vary.
5. Select a test to continue.