Snap-On POLARTEK HYBRID EEAC332 Скачать руководство пользователя страница 24

Страница: 24 / 44

• 24 •

FLUSHING HOSES

This operation makes the machine suitable for a service on
vehicles equipped with electrically driven compressors (hybrid
vehicles).

From the MANUAL PROCEDURE, select FLUSHING HOSES, the
following screen will be displayed:

Connect and open the HP and LP couplers to the respective
fitting on the machine, the press ENTER to continue:

After checking connection leaks, the following screen will be
displayed:

Flushing hoses lasts few minutes, then the machine will sound
and alarm and the following screen will be displayed:

Disconnect coupling, then press ENTER to return to the MAIN
MENU; FLUSHING HOSES is now successfully completed.

CHARGE

From the MANUAL PROCEDURE, select CHARGE, the following
screen will be displayed:

If HYBRID VEHICLE is selected the machine will perform
FLUSHING HOSES (Refer to Manual Procedure section, pg 24,
FLUSHING HOSES), then the following screen will be displayed:

NOTE

: press g, lb, or lb/oz to change the weight measurement

units.

EDIT CHARGE DATA

NOTE:

For most systems the quantity of fluid to be refilled is

indicated on a plate that is in the vehicle’s engine compartment.
If this quantity is not known, look for it in the relevant manuals.

Select CHARGE value box, then use the keys 0 to 9 to type the of
refrigerant to be charged into the A/C system.

NOTE:

If DATABASE is installed, it can be used to insert the value

of refrigerant into the CHARGE field.

NOTE:

If charge amount is lower than 4 oz (100 g) the following

popup warning will be displayed:

Charge amount lower than 4 oz (100 g) is not allowed, press
ENTER then re-enter a higher CHARGE AMOUNT value.

The use of PAG OIL

or DYE in hybrid

cars may damage

compressor!

Please use only

recommended oil.

R134a

MANUAL PROCEDURE

Hybrid vehicle

Standard vehicle

WARNING !

charge amount

Less than 100g/4oz

Press ENTER to continue

R134a

MANUAL PROCEDURE

CHARGE

R134a

MANUAL PROCEDURE

CHARGE AMOUNT

DATABASE

HP+LP

lb/oz

FLUSHING HOSES

Operation completed

Close and disconnect

HP and LP coupling

Press ENTER

R134a

MANUAL PROCEDURE

FLUSHING HOSES

R134a

MANUAL PROCEDURE

FLUSHING HOSES
CYCLE N. 1/4
A/C Pressure
Recovered oil

xxx

psi

xxx

Check connection leaks

Hoses pressure

-x.x

psi

R134a

MANUAL PROCEDURE

FLUSHING HOSES

R134a

MANUAL PROCEDURE

FLUSHING HOSES

Connect and open HP
and LP coupling as
shown on the display.

Press ENTER

Содержание POLARTEK HYBRID EEAC332













































Результаты поиска

Содержание POLARTEK HYBRID EEAC332

Отзывы:

Похожие инструкции для POLARTEK HYBRID EEAC332

Бренды по названию

Популярные бренды

Snap-On POLARTEK HYBRID EEAC332, Руководство пользователя

Результаты поиска

Содержание POLARTEK HYBRID EEAC332

Отзывы:

Похожие инструкции для POLARTEK HYBRID EEAC332

Бренды по названию

Популярные бренды