Snap-On EEWAEU551H, Быстрый старт

Страница: 7 / 16

Quick Start
Page 7
SyStem Startup
Once the aligner is in the alignment location plug power cord into the wall outlet.
System power requirements:
100-230v aC, 15 amp Circuit, 50/60HZ. (must have earth ground)
Step one
- Power on the Rear Pods and Left Reference Pod by momentarily pressing and
releasing the I/O button.
Step two - Locate the power switch located inside the cabinet along the upper left side. Switch
to the On position and allow a few moments for system startup.
When the power switch is turned on, the unit initiates the system boot-up. This boot sequence
will take a few moments.
The Home screen will appear next as the software finishes loading.