Snap-On APOLLO D8, Руководство пользователя

Страница: 19 / 111

Data Cable / Connections Data Cable Connection (OBD-II/EOBD Vehicles)
11
3. If needed, press the LED flashlight button switch on the end of the data cable
to turn the LED flashlight on (
Figure 4-3
), and locate the DLC.
Figure 4-3
DA-4 data cable LED flashlight
4. Connect the16-pin (J-1962) end of DA-4 cable (
Figure 4-4
) to the vehicle DLC.
Figure 4-4
DA-4 data cable (16-pin end) connection to vehicle DLC (typical DLC locations)
5. Select Continue once the data cable is connected.
The diagnostic tool establishes communication with the vehicle, then displays
a list of available tests, see
Scanner on page 13
for additional information.
4.1.1 Optional OBD-II/EOBD Data Cable
A shorter 6 ft. (1.8 m) DA-4 OBD-II data cable is available as an option.
Contact your sales representative to purchase all optional accessories.
IMPORTANT
Only use original Snap-on data cables and accessories with your
diagnostic tool. Total data cable length must not exceed 114.17 inches
(2.9 meters).
4.1.2 Optional Ethernet Data Cable
For vehicles that support the use of an ethernet data cable connection, use optional
data cable DA-4EA.
Figure 4-5
Contact your sales representative to purchase all optional accessories.
2 1 3 4 5 6 7 8
10 9 11 12 13 14 15 16
DA-4
J-1962