background image

event you need to ship the unit. We suggest the package be insured against loss or
in transit damage. When sending your product, include your name, address, phone
number, e-mail address, dated proof of purchase (or copy) and a statement about
the nature of the problem. Warranty coverage is conditioned upon purchaser fur-
nishing Alltrade with adequate written proof that they are the original purchaser and
of the original purchase date. Parts returned, freight prepaid and insured, will be
inspected and, at Alltrade's option, repaired and/or replaced free of charge if it is
found to be defective and subject to warranty. Alltrade retains the sole discretion to
determine whether any item or part is nonconforming and, if so, whether the item
and/or part will be repaired and/or replaced. If the unit is repaired, new or recondi-
tioned replacement parts may be used. If Alltrade chooses to replace the product, it
may replace it with a new or reconditioned of the same or comparable design. The
repaired or replaced unit will be warranted under the terms of the remainder of the
one year warranty period; covered defective parts not subject to normal wear and
tear or other exclusions will be repaired or replaced, at Alltrade's option. During the
warranty period, Alltrade will be responsible for the return shipping charges.
Alltrade's repair and/or replacement of any nonconforming item and/or part thereof
shall constitute fulfillment of all obligations to the purchaser. Alltrade shall not be
responsible or liable for any expense, including freight charges, or repairs made
outside Alltrade's facility or an Alltrade designated service, unless expressly agreed
to by Alltrade in writing. Under no circumstances shall Alltrade bear any responsi-
bility for loss of the unit, loss of time or rental, inconvenience, commercial loss, or
consequential damages.

For the location of an Authorized Service Center nearest you, please call customer
service at 1-888-278-8092.

EXCLUSIONS
Air nailers and staplers need periodic maintenance to remain in proper operating
condition.  Normal wear parts (o-rings and driver blades) shall be warranted to the
original purchaser to be free from defects in materials and workmanship for a peri-
od of 90 days from the original date of purchase.

This warranty does not cover parts damaged due to normal wear, abnormal condi-
tions, misapplication, misuse, abuse, accidents, operation, improper storage, or
freight damage. Parts damaged or worn by operation in dusty environments are not
warranted. Failure to follow recommended operating and maintenance procedures
also voids warranty.

DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY, USE
OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES, OR OTHER
CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE
NOT COVERED BY THIS WARRANTY.

24

SPECIFICATIONS

1 YEAR LIMITED WARRANTY

Express and Exclusive Limited Warranty to Original Retail Buyer
Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail
purchaser of the accompanying SNAP-ON™ portable air tool and no one else all
parts of the product (except those parts referred to below which are specifically
excluded from such warranty (see Exclusions) to be free from defects in materials
and workmanship for a period of one year from the original date of purchase.

The date of purchase shall be the date of shipment to the original purchaser, or the
date the original purchaser took possession, custody, or control of the product,
whichever occurred first. This warranty shall be null and void if the product or any
component thereof is modified or altered. This warranty does not apply to any other
product and/or component thereof manufactured or distributed by Alltrade, and
does not apply to products and/or components thereof designed, manufactured
and/or assembled by others, for which Alltrade makes no warranties whatsoever.
THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THE DESCRIPTION ON
THE FACE HEREOF.

WARRANTY PERFORMANCE
By purchasing this product, purchaser expressly acknowledges and agrees that
their sole and exclusive remedy under this warranty shall be strictly limited to the
repair or replacement of any covered nonconforming items or parts thereof provid-
ed that any such nonconforming item and/or part is promptly returned to an
Authorized Service Center within the applicable warranty period, with a written
request by purchaser that Alltrade repair and/or replace the nonconforming item
and/or part. We recommend that you keep the original product packaging in the

MODEL NUMBER

870012

AIR PRESSURE

70-120 PSIG (5.0- 8.5 kg/cm

2

G)

NAIL STYLE

Coil Roofing

NAIL LENGTH

3/4" - 1 3/4" (31.75 mm)

NAIL CAPACITY

120 NAILS

NAIL DIAMETER

.120"

NET WEIGHT

5 LBS. (2.2 KG)

23

Содержание 870012















Отзывы: