13
■
0.35–0.59 in
0.47–0.7 in
0.39 in
0.47–0.7 in
Synthetic brushes
The nylon wire brushes are good for general
purpose cleaning. These are excellent
cleaning tools on silverware, jewelry and
antiques. The two shapes make it possible
to get into tight corners and other difficult
places.
3/32" shank.
Aluminum Oxide Grinding Wheel/Stones
(Pink/brown) These are made of aluminum
oxide and cover virtually every possible kind
of grinding application on metal. Use them
for sharpening lawn mower blades,
screwdriver tips, knives, scissors and other
cutting tools. Use to remove flash from metal
castings, deburring any metal after cutting,
smoothing welded joints and removing rust.
These grinding stones can be resharped
with a dressing stone. 3/32" or 1/8" shank.
These thin discs are used for slicing,
cutting off and similar operations on
metal, plastic and wood. Use them
for cutting off frozen bolt heads and
nuts, or to reslot a screw head which
has become so damaged that the
screwdriver won’t work in it. Fine for
cutting small rods, small tubing,
cable.
Warning: Do not grind with the side
of a cut off wheel. Abrasive cut-off
wheels are intended for peripheral
grinding, side forces applied to these
wheels may cause them to shatter.
3/32" shank.
Cleaning
Gringding/
sharpening
Cutting
16
Grinding wheels
(use with mandrel )
12
10
10
Grinding bits
19 24
Cutting discs
(use with mandrel )
14
Silicon Carbide Grinding Wheel/Stones
(gray/green) Tougher than aluminum oxide
points, these are made especially for use on
hard materials such as glass and ceramics.
Typical uses might be the removal of stilt
marks and excess glaze on ceramics.
Engraving or grinding on glass.
3/32" shank.
