Snap Fresh BBT-JOL01, Руководство пользователя

Страница: 6 / 16

SAFETY WARNINGS FOR RECIPROCATING SAWS
• Hold power tool by insulated gripping surfaces,when performing an operation where the cuting
accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an electric shock.
• Keep hands away from the sawing range. Do not reach under the workpiece . Contact with the saw
blade can lead to injuries.
•
Apply the machine to the workpiece only when switched on. Otherwise there is danger of kickback
when the cutting tool jams in the workpiece.
• When sawing, the base plate must always faces against the workpiece. The saw blade can become
wedged and lead to loss of control over the machine.
• When the cut is completed, switch off the machine and then pull the saw blade out of the cut only
after it has come to a standstill. In this manner you can avoid kickback and can place down the
machine securely.
• Use only undamaged saw blades that are in perfect condition. Bent or dull saw blades can break,
negatively in uence the cut, or lead to kickback.
• Do not brake the saw blade to a stop by applying side pressure after switching off. The saw blade
can be damaged, break or cause kickback.
• Use clamps or another practical way to secure and support the workpiece to a stable platform.
Holding the workpiece by hand or against your body leaves it unstable and may lead to loss of
control.
• Use appropriate detectors to determine if utility lines are hidden in the work area or call the local
utility company for assistance. Contact with electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Penetrating a water line causes property damage.
• When working with the machine, always hold it firmly with both hands and provide for a secure
stance. The power tool is guided more secure with both hands.
• Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure
than by hand.
• Always wait until the machine has come to a complete stop before placing it down. The tool insert
can jam and lead to loss of control over the power tool.
6
•
•
SAFETY WARNINGS FOR BATTERY
Do not open the battery. Danger of shortcircuiting.
Protect the battery against heat, e. g., against continuous intense sunlight, fire, water, and moisture.
Danger of explosion.
•
•
•
In case of damage and improper use of the battery, vapours may be emitted. Ventilate the area
and seek medical help in case of complaints. The vapours can irritate the respiratory system.
Use the battery only in conjunction with your SnapFresh product. This measure alone protects the
battery against dangerous overload.
The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied
externally. An internal short circuit can occur and the battery can burn, smoke, explode or overheat.