SNAP CIRCUITS BRIC: STRUCTURES, Инструкция по эксплуатации

Страница: 13 / 60

Build the circuit as shown, and turn on the slide switch (S1).
The four LEDS (D8, D9, D11, & D12) should be on, the lamp (L4)
should be off, and there may be a slight clicking from the melody
IC (U32). For best effects, place the fiber optic tree on one of the
LEDs using the mounting base, and dim the room lights.
Next, add a jumper wire at one of these locations:
A. Across U32: the sound stops and D11 is brighter.
B. Across D11: D11 is off, and U32 plays a tune.
C. Across U32 and D11: L4 is on.
Use the remover tool to help separate the bricks and adapters
when dismantling the circuit.
3
2
4
1
8x
6x
7
x
3x
This circuit has the melody
IC (U32), blink red LED (D11),
and lamp (L4) connected in
series, to show the differences
in how they operate.
12
Project 3 4 Lights and Clicking