4
Setup and Operation
• This device will switch off automatically after 15 minutes timer run out.
• Do not setup or use the device in a bathroom or similary wet / damp areas.
•
Please choose a chair with desired height and be seated, then put your feet on the
product.
•
Operate below control panel to get foot and calf massages.
1.Power button: Press this button to turn on or turn off the product; After the product
has been connected to the power supply, the white indicator light would flicker;
Press this button once, then the white indicator light would remain on all along,
indicating that the product has shifted to standby mode.
2. Rolling massage mode button: Press this button,then heating function,rolling
massage,and air compression would be activated automatically; The heating function
and air compression could be controlled independently.
3.Heating button: Press this button to control the heating function; When the product
is turned on, the default temperature for heating function is 45
℃
(113°
℉
) with red
indicator light on; If you feel that the temperature is too high, press this button again.
If the white indicator light is on, the temperature for the heating function would
be 40
℃
(104°F).
4.Airbag control button: Turn on or furn off the airbag massage independently via
this button.
5. Intensity adjustment button: Press this button to adjust intensity of airbags among
3 levels (white light for low intensity/ blue light for medium intensity/ red light for
high intensity); When the product is turned on, the default intensity would be low
level; If the airbag massage is turned off, this button would synchronize automatically.
Note:
