3
Instruc�ons for use
Power Bu�on
Intensity Bu�on
Mode Bu�on
Heat Bu�on
1. Turn off the massager before replacing another massage head.
2. Your massager comes equipped with 3 a�achments (Figure 1). A�ach
the different heads by twis�ng clockwise (Figure 2), detach the installed
massage head by twis�ng an�-clockwise and pulling out (Figure 3).
Always turn off the device while replacing the heads
Fig.2
Fig.3
Press to choose High,
Medium,Low
intensity of vibra�on
Press to change Mode
between M1 to M3
Press to turn the
Heat func�on
on or off
Press to turn the
massager on/off
NOTE:
When Power
bu�on indicator turns
green and blink, that
means the ba�ery is low,
please charge in �me.
3. Turn on the massager by opera�ng the control bu�ons
(insturc�ons as below)
4. Apply the massager head lightly to the area you wish to treat.
Move the unit slowly, holding it over the targeted area. Treat the
area for a short period of �me and move to another area. NEVER treat
the same area for longer than 3 minutes.
5. To turn the unit off by pressing the power bu�on. For your safety
the device will automa�cally turn off a�er 15 minutes of con�nuous use.
