10
Once the bracket is attached to the freezer compartment door, fix it in place on the
other side of the refrigerator.
7.
Turn the bracket
6
around 180° together with the washers on the axle and the
plastic spacer. Remove the axle and the washers and reattach them on the other
side of the bracket. Once the bracket
6
is attached to the refrigerator compartment
door, fix it in place on the other side of the refrigerator in the uppermost apertures.
Use the covers
c
to cover the bracket and the remaining space.
8.
Remove the bolt covers
a
and the stoppers
b
. Remove the screws that hold the
handle in place. Move the handle to the other side and screw them in place. Place
the stoppers into the remaining apertures in the door, and put the screw caps in
place.
9.
Remove the cover
10
from the bottom cover
1
and insert it to the guides on the
other side of the bottom cover (symmetrically to former position). Insert left and
right legs of the bottom cover
1
(see pic.) and push it until cover fixing.
OPERATION PROBLEMS AND THEIR SOLUTIONS
(TROUBLESHOOTING)
What if …
•
The appliance is plugged in to the mains but it does not work.
Check that
your house electricity supply installations are in order. Check that the plug is correctly
inserted into the electricity supply socket.
•
The noise has become louder.
Check that the appliance is standing stable, on a
level place. To make it level, regulate the front feet. Check if the appliance is not
touching any furniture, and that no part of the refrigeration system at the back part of
the appliance body is touching the wall. Pull the appliance away from any furniture or
walls. Check that the cause of increased noise isn’t due to bottles, cans or dishes in
the appliance that might be touching each other.
•
Water has appeared at the bottom of the refrigerator compartment.
Check
whether a thaw water channel space isn’t blocked. Clean the thaw water channel
space with a cleaner intended for that purpose.
•
Water has appeared on the tempered glass shelves.
Food items or dishes in the
refrigeration compartment are touching the back wall of the compartment. Do not let
food items or dishes touch the back wall.
•
Moisture dripping from under the glass shelves.
If you placed many containers
with liquids on the shelf, moisture can condense and drip onto the shelf below. Move
some containers with liquids onto other shelves.
•
Water has appeared under the appliance.
The thaw water collection tray has
slipped off the compressor. Place the tray on top of the compressor.
•
When the appliance door is opened, the rubber sealing gasket pulls out.
The
gasket is smeared with sticky foodstuffs (fat, syrup). Clean the sealing gasket and the
groove for it with warm water containing soap or dishwashing detergent and wipe dry.
Put the rubber sealing gasket back into the place.
•
High temperature in appliance, the compressor operation pauses are short.
Ascertain whether the appliance doors are shutting tightly, whether the door wasn’t
kept open longer than necessary when taking out or putting in foodstuffs or whether
a large amount of warm food was placed in the appliance.
