© 2019 SMUKEE. All rights reserved. EN
11
4.1 Setting up the product
Position the product so that it does not accidentally fall or tip over.
4.2 Switching lights on and off
To switch the lighting on and off in both cases, use the switch shown in the
previous illustrations.
4.3 CR2032 battery replacement
Incorrect insertion of the battery will only result in the backlight not working.
ATTENTION:
Do not charge non-rechargeable batteries (other than accumulators).
Do not short-circuit the battery power terminals.
Use batteries of the same type as recommended for this device.
When installing new batteries, remember to check the +/- polarity of the
batteries.
Remove discharged batteries immediately from the unit, as they may leak
and cause damage.
Always remove the batteries when not in use - this will prevent the
product from being damaged if the electrolyte leaks from the battery.
Always replace the entire battery pack with a functional one.
Keep batteries away from children and animals.
Do not dispose of your used batteries in a waste bin, but in special
containers for used batteries and accumulators.
Light
switch
Cover hinge
Battery
cover
Chamber for 2
batteries CR2032
3V
Polarity
marking
Chamber
latch
