SMTAV BV30N Скачать руководство пользователя страница 2

Страница: 2 / 53

SMTAV

Preface

Thank you for using the HD Professional Video Conferencing Camera. This manual introduces the function, installation and

operation of the HD camera. Prior to installation and usage, please read the manual thoroughly.

Precautions

This product can only be used in the specified conditions in order to avoid any damage to the camera:

•

Don’t subject the camera to rain or moisture.

•

Don’t remove the cover. Removal of the cover may result in an electric shock, in addition to voiding the warranty.

In case of abnormal operation, contact the manufacturer.

•

Never operate outside of the specified operating temperature range, humidity, or with any other power supply

than the one originally provided with the camera.

•

Please use a soft dry cloth to clean the camera. If the camera is very dirty, clean it with diluted neutral detergent;

do not use any type of solvents, which may damage the surface.

Note

This is an FCC Class A Digital device. As such, unintentional electromagnetic radiation may affect the image quality of TV in a

home environment.

Содержание BV30N






















































Результаты поиска

Содержание BV30N

Отзывы:

Похожие инструкции для BV30N

Бренды по названию

Популярные бренды

SMTAV BV30N, Руководство пользователя

Результаты поиска

Содержание BV30N

Отзывы:

Похожие инструкции для BV30N

Бренды по названию

Популярные бренды