Instructions
DPLL
MIN ~ MAX
(A total of 15 kinds, the default is 7 kinds. The larger the number is, the stronger
the range to adapt to jitter, and the smaller the number, the better the performance
against clock jitter.)
This DPLL setting is a special function of ESS series products. It can adjust the
internal DPLL digital phase locked loop circuit Bandwidth, so that the chip
achieves a balance between anti clock jitter and input tolerance.
Its function:
When the clock stability of the input signal is good, this value can be reduced,
so that the clock performance of the system is better;
When the clock stability of the input signal is not good, the sound may be inter-
rupted. Increase this value can avoid the sound interruption! Especially when
using TV as signal source!
AUDIO PHASE
NORMAL (2+,3-)
INVERTED (2-,3+)
DIMMER
5 second ~ 60 second
(
The range is 5 seconds-60 seconds. After setting, the screen will automatically
go off within this time, and the screen will re-light up if you operate the remote
control or the knob at any time.
)
In this page, press and hold the button of the knob, the system will reset all
settings, including Bluetooth pairing status.
BRIGHTNESS
LEVEL 1 ~ LEVEL 6
RESET
