SMSC USB464 Скачать руководство пользователя страница 51

Страница: 51 / 65

High Speed Inter-Chip USB 2.0 Hub and Flash Media Controller

Datasheet

SMSC USB4640/USB4640i

Revision 1.0 (06-01-09)

DATASHEET

8.4.5.5

11Ch-122h: Combo LUN 4 Identifier String

8.4.5.6

123h-145h: Not Applicable

8.4.5.7

146h: Dynamic Number of Extended LUNs

8.4.5.8

147h-14Bh: Device to LUN Mapping

8.4.5.9

14Ch-17Bh: Not Applicable

8.4.5.10

17Ch -17Fh: Non-Volatile Storage Signature for Extended Configuration

BYTE

NAME

DESCRIPTION

6:0

CLUN4_ID_STR

If the device to LUN mapping bytes have configured this LUN to be a combo

LUN, then these strings will be used to identify the LUN rather than the

device identifier strings.

BYTE NAME

DESCRIPTION

34:0

Not Applicable

Not applicable.

BIT

NAME

DESCRIPTION

7:0

DYN_NUM_

EXT_LUN

These bytes are used to specify the number of LUNs the device exposes to

the host. These bytes are also used for icon sharing by assigning more than

one LUN to a single icon. This is used in applications where the device

utilizes a combo socket and the OEM wishes to have only a single icon

displayed for one or more interfaces.

If this field is set to "FF", the program assumes that you are using the default

value and icons will be configured per the default configuration.

BYTE

NAME

DESCRIPTION

4:0

DEV_LUN_MAP

These registers map a device controller (SD/MMC, SM (

Note 8.2

), and MS)

to a Logical Unit Number (LUN). The device reports the mapped LUNs to

the USB host in the USB descriptor during enumeration. The icon installer

associates custom icons with the LUNs specified in these fields.

Setting a register to "FF" indicates that the device is not mapped. Setting all

of the DEV_LUN_MAP registers for all devices to "FF" forces the use of the

default mapping configuration. Not all configurations are valid. Valid

configurations depend on the hardware, packaging, and OEM board layout.

The number of unique LUNs mapped must match the value in the

Section

8.4.3.7, "D3h: Dynamic Number of LUNs," on page 40

BIT NAME

DESCRIPTION

49:0

Not Applicable

Not applicable.

BYTE

NAME

DESCRIPTION

3:0

NVSTORE_SIG2

This signature is used to verify the validity of the data in the upper 256 bytes

if a 512 byte (4 kilobytes) EEPROM is used, otherwise this bank is a read-only

configuration area. The signature must be set to 'ecf1'.

Содержание USB464


































































Результаты поиска

Содержание USB464

Отзывы:

SMSC USB464, Техническое описание, Страница: 51 / 65

Результаты поиска

Содержание USB464

Отзывы: