USB375x EVB - Evaluation Board User Manual
Revision 1.1 (08-29-11)
4
SMSC USB375x EVB
USER MANUAL
3 Software
The USB375x EVB comes with a CD that contains evaluation software that can be used with the Total
Phase Aardvark adaptor. To install the software, run
Setup.exe
, found on the CD. This will install the
USB3750 Evaluation Software, the LabVIEW Run-time engine (to run the executable), and the Total
Phase drivers to communicate with the Aardvark. Once the software has been installed, locate and
run the
USB3750 Eval.exe
program on the computer.
The tab on the right is labeled
Charger Detect
; This tab shows how the USB3750 can be used to
detect the connection of the upstream port. In this section the code is simply polling the status register,
and updating the display accordingly.
Figure 3.1 Charger Detect with No Connection and SDP Connection