4
LED Lights Status Explanation
What do the LED flashes mean?
ON
ON
ON
SLOW FLASHING
SOLID ON
SOLID ON
SLOW FLASHING
FAST FLASHING
OFF
ON/
OFF
ORANGE LED
RX High Power
GREEN LED
Oscilation
Attenuation (Att)
Orange Solid ON = Full Gain - Green Solid ON = Full Gain
Orange Solid ON & Green Slow Flashing = Oscillation Att
Orange Off & Green Fast Flashing = Oscillation Shutdown
Orange Slow Flashing & Green Solid ON = RX High Power Att
Each flash indicates 3dB of gain reduction also known as gain attenuation.
For example: three flashes equals 9dB of attenuation.
Green LED indicates loop oscillation status. When flashing it means reduction of
gain. To improve you need to spread the distance between the inside and outside
antennas. If you spread them far enough away, the Green LED will become SOLID ON.
Orange LED indicates RX (outside signal strength) status. When flashing it means
reduction of gain also known as attenuation of gain. You cannot prevent this
condition. As you drive away from the nearby cell tower and get far enough away
the flashing Orange will automatically stop flashing which indicates that the
boooster is no longer attenuated. As you appproch another nearby cell tower the
Orange may begin flashing again and will stop flashing as you get farther away.
This is the normal operating process.
Each flash indicates 3dB of gain reduction also known as gain attenuation.
For example: three flashes equals 9dB of attenuation.
